The Champion Cooler N28W Evaporative Cooler is designed for use in dry, arid climates. Un-like an air-conditioner unit using Freon and using excessive energy to cool, this heavy-duty cooler draws air from outside into the cooler and by the evaporation of water inside the unit allows the blower to push cool air into the room. They can lower indoor temperatures by as much as 15-20 Degree F. Evaporative coolers have low installation/maintenance costs; use 75% less electricity; no ozone damaging refrigerants. The water saturated pads act as a type of filter, removing dust and allergens from the air. Includes direct drive 2-speed motor, installation kit and leveling leg. Cabinet made from heavy-gauge galvanized steel to resist weather and impact. All metal surfaces treated for corrosion with electrostatically-applied UV-stabilized polyester powder finish. Bolted construction for easy installation and access to replaceable parts. Permanently lubricated pump. Machine balanced blower wheel for smooth, quiet operation and maximum air delivery. Uses Aspen cooler pad. UL listed. Warranty: 8 years or original base assembly if water leakage should occur due to rust out. 1 year on any original part that fails. Color: Cool sand. No. N28W: Area Cooled: 400 to 600 sq. ft., Motor: 2 Speed, 1/3 HP, Water Capacity: 4.5 gal, Voltage: 115V, Cooling Rate: 2800 CFM, Height: 27", Width: 24", Depth: 30.25". Built in the USA. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Cools Up to 600 Square Feet for Whole-Room Cooling
Circulates Air at Up to 2800 CFM
Cabinet Made From Heavy-Gauge Galvanized Steel to Resist Weather and Impact
Machine Balanced Blower Wheel for Smooth, Quiet Operation and Maximum Air Delivery
Comes With a 1/3 horsepower, 2 Speed, 120V Motor, Installation Kit and Leveling Leg