A digital thermostat is a convenient way to control your MasterCool ducted evaporative cooler. This MasterStat digital thermostat is designed to operate a 2 fan speed motor, water pump motor, and water purge pump (optional). It has a backlit LCD display which makes reading temperatures easy. In case of a power outage, this thermostat stores your last active control settings so your cooler will not need to be reprogrammed. The pre-wet mode ensures the media pads are fully saturated prior to the pump being activated. Minimal wiring is required when installing this thermostat into your existing outlet box. A rain proof control box is included for your convenience. MasteStat is a registered trademark of Champion Cooler Corporation. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Designed to control any ducted evaporative cooler with a 2-speed motor up to 1 HP at 120-Volt or 2 HP at 240-Volt
Onboard sensor has a control range of 50 to 90 Degrees F; Outputs provided are auto/manual, pump, fan and timer modes
If power is interrupted while unit is operating, the unit will resume in the mode active during power loss; Rain proof control box included
Kit includes wall control thermostat, 2-speed control, wire nut for common earth connection; spare 3.15-Amp fuse for control, jumper wire for link to N-link; Easy to install in an existing outlet box - minimal wiring required
Compatible with MasterCool ADA51/71, ADA5112/7112, ASA51/71, ASA5112/7112, AUA51/71, AUA5112/7112, all AD1C-contractors series, all AS1C-contractors series, all AU1C-contractors series, all AD2C-contractors series, AS2C-contractors series, AU2C-contractors series; Compatible with UltraCool ADA50/70, ADA50-12/70-12, ASA50/70, ASA50-12/ASA70-12, AUA50/70, AUA50-12/70-12 ada, ADA51/71-series, ADA5